Page Comparison

...

Aim:

Assess the quality of raw datasets
Define quality trimming parameters prior RNAseq gene profiling

...

Code Block
mkdir -p $HOME/workshop/2024/rnaseq/scripts cp /work/training/2024/rnaseq/scripts/* $HOME/workshop/2024/rnaseq/scripts/ ls -l $HOME/workshop/2024/rnaseq/scripts/

Line 1: The -p indicates create 'parental directories as required. Thus the line 1 command creates both /workshop/ and the subfolder /workshop/scripts/
Line 2: Copies all files from /work/datasets/workshop/scripts/ as noted by an asterisk to the newly created folder $HOME/workshop/scripts/

Copy public data to your $HOME

Code Block
mkdir -p $HOME/workshop/2024/rnaseq/data cp /work/training/2024/rnaseq/data/* $HOME/workshop/2024/rnaseq/data/ # list the content of the $HOME/workshop/2024/rnaseq/data/

Line 1: The first command creates the folder /scripts/
Line 2: Copies all files from /work/datasets/workshop/scripts/ folder as noted by an asterisk to newly created $HOME/workshop/scripts/ folder
Line 3: a quick challenge - see the previous section for hints

Create a folder for running the nf-RNA-seq pipeline

...

Code Block

mkdir -p $HOME/workshop/2024/rnaseq/runs
mkdir $HOME/workshop/2024/rnaseq/runs/run1_test
mkdir $HOME/workshop/2024/rnaseq/runs/run2_QC
mkdir $HOME/workshop/2024/rnaseq/runs/run3_RNAseq
cd $HOME/workshop/2024/rnaseq/runs

Lines 1-4: create sub-folders for each exercise
Line 5: change the directory to the folder “run1_test”
Line 6: print the current working directory

Exercise 1: Run RNA-seq QC check

The pipeline requires preparing at least 2 files:

Metadata file (samplesheet.csv) thatspecifies the name of the samples, location of FASTQ files ('Read 1' and ‘Read 2’), and strandedness (forward, reverse, or auto. Note: auto is used when the strandedness of the data is unknown)
PBS Pro script (launch_nf-core_RNAseq_QC.pbs) with instructions to run the pipeline

Create the metadata file (samplesheet.csv):

Change to the data folder directory:

Code Block
cd $HOME/workshop/2024/rnaseq/data/

Copy the bash script to the working folder

Code Block
cp /work/training/2024/rnaseq/scripts/create_samplesheet_nf-core_RNAseq.sh $HOME/workshop/2024/rnaseq/data/

Note: you could replace ‘$HOME/workshop/data’ with “.” A dot indicates ‘current directory’ and will copy the file to the directory where you are currently located

View the content of the script:

Code Block
cat create_samplesheet_nf-core_RNAseq.sh

Example for Single-End data (only ‘Read 1’ is available):

#!/bin/bash -l

#User defined variables

##########################################################

DIR='$HOME/workshop/data/'

INDEX='samplesheet.csv'

##########################################################

#load python module

module load python/3.10.8-gcccore-12.2.0

#fetch the script to create the sample metadata table

wget -L https://raw.githubusercontent.com/nf-core/rnaseq/master/bin/fastq_dir_to_samplesheet.py

chmod +x fastq_dir_to_samplesheet.py

#generate initial sample metadata file

./fastq_dir_to_samplesheet.py $DIR $INDEX \

--strandedness auto \

--read1_extension .fastq.gz

NOTE: when paired end data is available (R1 and R2 FASTQ files for each sample). Then use:

--read1_extension R1.fastq.gz \

--read2_extension R2.fastq.gz

NOTE: check the suffix of the FASTQ files to specify the extension (e.g., R1_001.fastq.gz or R1.fq.gz)

Let’s generate the metadata file by running the following command:

Code Block
sh create_RNAseq_samplesheet.sh

Check the newly created samplesheet.csv file:

Code Block
ls -l cat samplesheet.cvs

sample,fastq_1,fastq_2,strandedness

SRR20622172,/work/training/rnaseq/data/SRR20622172.fastq.gz,,auto

SRR20622173,/work/training/rnaseq/data/SRR20622173.fastq.gz,,auto

SRR20622174,/work/training/rnaseq/data/SRR20622174.fastq.gz,,auto

SRR20622175,/work/training/rnaseq/data/SRR20622175.fastq.gz,,auto

SRR20622176,/work/training/rnaseq/data/SRR20622176.fastq.gz,,auto

SRR20622177,/work/training/rnaseq/data/SRR20622177.fastq.gz,,auto

SRR20622178,/work/training/rnaseq/data/SRR20622178.fastq.gz,,auto

SRR20622179,/work/training/rnaseq/data/SRR20622179.fastq.gz,,auto

SRR20622180,/work/training/rnaseq/data/SRR20622180.fastq.gz,,auto

Copy the PBS Pro script for QC (launch_nf-core_RNAseq_QC.pbs)

Copy and paste the code below to the terminal:

Code Block

cp $HOME/workshop/2024/rnaseq/data/samplesheet.csv $HOME/workshop/2024/rnaseq/runs/run2_QC
cp $HOME/workshop/scripts/launch_nf-core_RNAseq_QC.pbs $HOME/workshop/2024/rnaseq/runs/run2_QC
cd $HOME/workshop/2024/rnaseq/runs/run2_QC

Line 1: Copy the samplesheet.csv file to the working directory
Line 2: move to the working directory
Line 3: copy the launch_nf-core_RNAseq_QC.pbs submission script to the working directory

View the content of the launch_nf-core_RNAseq_QC.pbs script:

Code Block
cat launch_nf-core_RNAseq_QC.pbs

#!/bin/bash -l

#PBS -N nfrnaseq_QC

#PBS -l select=1:ncpus=2:mem=4gb

#PBS -l walltime=24:00:00

#work on current directory

cd $PBS_O_WORKDIR

#load java and set up memory settings to run nextflow

module load java

export NXF_OPTS='-Xms1g -Xmx4g'

nextflow run nf-core/rnaseq \

-profile singularity \

-r 3.14.0 \

--input samplesheet.csv \

--outdir results \

--genome GRCm38-local \

--skip_trimming \

--skip_alignment \

--skip_pseudo_alignment

We recommend running the nextflow nf-core/rnaseq pipeline once and then assessing the fastqc results folder to assess if sequence biases are present in the 5'-end and 3'-end ends of the sequences.
Version 3.12.0 allows running the pipeline to do quality assessment only, without any alignment, read counting, or trimming.

Submitting the job

Once you have created the folder for the run, the samplesheet.csv file, and launch.pbs, you are ready to submit the job to the HPC scheduler:

Code Block
qsub launch_nf-core_RNAseq_QC.pbs

Monitoring the Run

Code Block
qjobs

to check on the jobs, you are running. Nextflow will launch additional jobs during the run.

You can also check the .nextflow.log file for details on what is going on.

Once the pipeline has finished running - Assess the QC report:

NOTE: To proceed, you need to be on QUT’s WiFi network or signed via VPN.

To browse the working folder in the HPC type in the file finder:

Windows PC

Code Block
\\hpc-fs\work\training\rnaseq

Mac

Code Block
smb://hpc-fs/work/training/rnaseq

Evaluate the nucleotide distributions in the 5'-end and 3'-end of the sequenced reads (Read1 and Read2). Look into the “MultiQC” folder and open the provided HTML report.

Items to check:

The overall quality of the experiment and reads. Look at the “Sequence Quality Histogram” plot. For example, if Phred assigns a quality score of 30 to a base, the chances that this base is called incorrectly are 1 in 1000. Phred quality scores are logarithmically linked to error probabilities.

Phred Quality Score	Probability of incorrect base call	Base call accuracy
10	1 in 10	90%
20	1 in 100	99%
30	1 in 1000	99.9%
40	1 in 10,000	99.99%
50	1 in 100,000	99.999%
60	1 in 1,000,000	99.9999%

Assess QC reports (FastQC and MultiQC) to define how many nucleotides should be trimmed from the 5'-end and/or 3-end regions of the FASTQ reads (see Case 3 below).

Versions Compared

Old Version 1

New Version 2

Key

Aim:

Exercise 1: Run RNA-seq QC check

Create the metadata file (samplesheet.csv):

Submitting the job

Monitoring the Run

Once the pipeline has finished running - Assess the QC report:

Page Comparison

Versions Compared

Old Version 1

New Version 2

Key

<span class="diff-html-changed" data-a11y-before="Start of changed content" data-a11y-after="End of changed content" id="changed-diff-0">[data-colorid=</span>

Exercise 1: Run RNA-seq QC check

Create the metadata file (samplesheet.csv):

Submitting the job

Monitoring the Run

Once the pipeline has finished running - Assess the QC report: