Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Next »

One of the core features of Nextflow is the ability to cache task executions and re-use them in subsequent runs to minimize duplicate work. Resumability is useful both for recovering from errors and for iteratively developing a pipeline

Resume option

You can enable resumability in Nextflow with the -resume flag when launching a pipeline with nextflow run.

All task executions are automatically saved to the task cache, regardless of the -resume option (so that you always have the option to resume later).

 

Structure of work folder

When nextflow runs, it assigns a unique ID to each task. This unique ID is used to create a separate execution directory, within the work directory, where the tasks are executed and the results stored. A task’s unique ID is generated as a 128-bit hash number.

When we resume a workflow, Nextflow uses this unique ID to check if:

  1. The working directory exists

  2. It contains a valid command exit status

  3. It contains the expected output files.

If these conditions are satisfied, the task execution is skipped and the previously computed outputs are applied.

 

When a task requires recomputation, ie. the conditions above are not fulfilled, the downstream tasks are automatically invalidated.

Therefore, if you modify some parts of your script, or alter the input data using -resume, Nextflow will only execute the processes that are actually changed.

The execution of the processes that are not changed will be skipped and the cached result used instead.

This helps a lot when testing or modifying part of your pipeline without having to re-execute it from scratch.

By default the pipeline results are cached in the directory work where the pipeline is launched.

We can use the Bash tree command to list the contents of the work directory. Note: By default tree does not print hidden files (those beginning with a dot .). Use the -a to view all files.

tree -a work

Provide a relevant example from test run

Example of work directory:

work/
├── 12
│   └── 5489f3c7dbd521c0e43f43b4c1f352
│       ├── .command.begin
│       ├── .command.err
│       ├── .command.log
│       ├── .command.out
│       ├── .command.run
│       ├── .command.sh
│       ├── .exitcode
│       └── temp33_1_2.fq.gz -> /home/training/data/yeast/reads/temp33_1_2.fq.gz
├── 3b
│   └── a3fb24ad3242e4cc8e5aa0c24d174b
│       ├── .command.begin
│       ├── .command.err
│       ├── .command.log
│       ├── .command.out
│       ├── .command.run
│       ├── .command.sh
│       ├── .exitcode
│       └── temp33_2_1.fq.gz -> /home/training/data/yeast/reads/temp33_2_1.fq.gz
├── 4c
│   └── 125b5e5a5ee144fa25dd9bccd467e9
│       ├── .command.begin
│       ├── .command.err
│       ├── .command.log
│       ├── .command.out
│       ├── .command.run
│       ├── .command.sh
│       ├── .exitcode
│       └── temp33_3_1.fq.gz -> /home/training/data/yeast/reads/temp33_3_1.fq.gz
├── 54
│   └── eb9d72e9ac24af8183de569ab0b977
│       ├── .command.begin
│       ├── .command.err
│       ├── .command.log
│       ├── .command.out
│       ├── .command.run
│       ├── .command.sh
│       ├── .exitcode
│       └── temp33_2_2.fq.gz -> /home/training/data/yeast/reads/temp33_2_2.fq.gz
├── e9
│   └── 31f28c291481342cc45d4e176a200a
│       ├── .command.begin
│       ├── .command.err
│       ├── .command.log
│       ├── .command.out
│       ├── .command.run
│       ├── .command.sh
│       ├── .exitcode
│       └── temp33_1_1.fq.gz -> /home/training/data/yeast/reads/temp33_1_1.fq.gz
└── fa
    └── cd3e49b63eadd6248aa357083763c1
        ├── .command.begin
        ├── .command.err
        ├── .command.log
        ├── .command.out
        ├── .command.run
        ├── .command.sh
        ├── .exitcode
        └── temp33_3_2.fq.gz -> /home/training/data/yeast/reads/temp33_3_2.fq.gz

Task execution directory

Within the work directory there are multiple task execution directories. There is one directory for each time a process is executed. These task directories are identified by the process execution hash. For example the task directory fa/cd3e49b63eadd6248aa357083763c1 would be location for the process identified by the hash fa/cd3e49 .

The task execution directory contains:

  • .command.sh: The command script.

  • .command.run: The file is a bash script that Nextflow generates to execute the .command.sh script, handling the necessary environment setup and command execution details.

  • .command.out: The complete job standard output.

  • .command.err: The complete job standard error.

  • .command.log: The wrapper execution output.

  • .command.begin: A file created as soon as the job is launched.

  • .exitcode: A file containing the task exit code.

  • Any task input files (symlinks)

  • Any task output files

Specifying another work directory

Depending on your script, this work folder can take a lot of disk space. You can specify another work directory using the command line option -w. Note Using a different work directory will mean that any jobs will need to re-run from the beginning.

Clean the work directory

If you are sure you won’t resume your pipeline execution, you can clean the work folder using the nextflow clean command. It is good practice to do so regularly.

nextflow clean [run_name|session_id] [options]
  • No labels